(817) 609-8001
902 Fort Worth Highway
Weatherford, Texas 76086
Mon - Fri 8AM to 5:30PM | Sat 8AM to 2PM

News

24

Shop S&B Cold Air Intake Systems at Viper Motorsports in Weatherford, Texas

posted on
Shop S&B Cold Air Intake Systems at Viper Motorsports in Weatherford, Texas

S&B Filters manufacturers cold air intakes, filters and other performance parts for diesel / gas trucks SUVs and UTVs. These high quality, reasonably priced Cold Air Intake Systems are engineered to greatly reduce airflow restriction, while protecting your engine. S&B constantly tests their intake systems against stock systems as well as their competitor’s systems in order to be the best. The S&B testing procedures follow the ISO 5011 standards which is the same testing protocol used by most large auto manufacturers. S&B Filters maintains high quality at a low price point and nearly all of their products are made in the U.S.

 

S&B Cold Air Intake Systems for Diesel/Gas Trucks and SUVs

S&B offers Cold Air Intake Systems and replacement Filters for a wide variety of vehicles including:

  • Chevy Silverado 1500, 2500 and 3500, Suburban and Tahoe
  • Cadillac Escalade
  • Dodge Ram 1500 2500 3500 4500 and 5500
  • Ford F-150, F-250, F-350, F450 and F-550
  • GMC Sierra 1500, 2500, 3500 and Yukon
  • Jeep Wrangler JK, TJ
  • Nissan Titan
  • Toyota Tundra and Tacoma

S&B Filters “Million Mile Limited Warranty”
S&B air filters and intake kits purchased from an Authorized Dealer are backed by S&B’s Million Mile Limited Warranty when used under typical driving conditions and on vehicles for which they were designed. If an S&B product is not performing properly or is defective, S&B will replace it. At Viper Motorsports, we have tested this warranty on one of our personal vehicles and found that S&B does actually stand behind their products as promised.

More air Flow… More Horsepower
It has been shown that more airflow into your engine has a tendency to increase horsepower. S&B’s airflow testing shows how their intake systems and filter stack up against their competitor’s intake systems as well as stock systems. Their goal is to exceed the performance and durability of both.

Better Materials Equals Better Performance and a Better Product
The Aftermarket Industry-standard urethane filters have a tendency to crack over time. The silicone used in S&B’s latest filters will NOT degrade over time and also possesses superior tear strength and can handle temperatures as high as 400°F.

S&B Replacement Filters for K&N, aFe and Banks Cold Air Intake Systems.
Of course, S&B sells replacements filters for the products that they manufacture but, they also sell superior cleanable cotton and dry replacement filters for other manufacturer’s intake systems as well as filters for stock intake systems. You can now have the quality, durability and performance of an S&B filter without totally replacing your existing intake system.

S7B Replacement Filters Weatherford Texas

S&B Particle Separators for UTV’s
S&B Filters also offers Particle Separators for most Polaris, Can-Am and Yamaha UTV’s which can remove 94% of the dust before it even reaches your stock filter.

Particle Separators for UTVs Weatherford Texas

Shop S&B Cold Air Intake Systems at Viper Motorsports in Weatherford, Texas

If you want your diesel or gas truck or SUV to breathe better, you really can’t do better than a cold air intake system from S&B Filters. Give Viper Motorsports a call at (817) 609-8001 or stop by and see us at 902 Fort Worth Hwy in Weatherford, Texas or online at vipermotorsports.com. We’ll help you choose the right S&B intake system for your vehicle and we’ll provide expert installation. We offer S&B cold Air Intakes and replacement filters to residents of Weatherford, Texas, Aledo, Mineral Wells, TX, Granbury, Springtown and surrounding areas.

Categories: | View Count: (3700) | Return

Contact Viper Motorsports

Send »           

Stay Connected

Contact Us

Phone: (817) 609-8001
Fax:
Address: 902 Fort Worth Hwy
Weatherford, TX 76086
Powered by Net Driven
Login